SENECA / Z-Serisi / Electrimeter Converter
Input: Alternate Current (0-5 Aac End Scale Current, 0-10 Aac End Scale Current Input)Output: Current (0-20, 4-20 mA) Higher Load Resistance: 600 Ohm, Voltage (0-5, 1-5, 0-10, 2-10 VDC) Lower Load Resistance: 2.5 kOhm
Z201
KATALOĞU İNDİR
Input: Alternate Current (0-5 Aac End Scale Current, 0-10 Aac End Scale Current Input)Output: Current (0-20, 4-20 mA) Higher Load Resistance: 600 Ohm, Voltage (0-5, 1-5, 0-10, 2-10 VDC) Lower Load Resistance: 2.5 kOhm
Z201-H
KATALOĞU İNDİR
Input: Voltage (10-490 VAC in 41 Preset scales)Output: Current (0-20, 4-20 mA) Higher Load Resistance: 600 Ohm, Voltage (0-5, 1-5, 0-10, 2-10 VDC) Lower Load Resistance: 2.5 kOhm
Z202
KATALOĞU İNDİR
Input: Voltage (10-490 VAC in 41 Preset scales)Output: Current (0-20, 4-20 mA) Higher Load Resistance: 600 Ohm, Voltage (0-5, 1-5, 0-10, 2-10 VDC) Lower Load Resistance: 2.5 kOhm
Z202-H
KATALOĞU İNDİR
Input: Alternate Voltage (0-500 VAC), Direct Voltage (0-540 VDC) - Settable Range by DIP SwitchOutput: Current (0-20, 4-20 mA) Higher Load Resistance: 600 Ohm, Voltage (0-5, 1-5, 0-10, 2-10 VDC) Lower Load Resistance: 2.5 kOhm
Z202-LP
KATALOĞU İNDİR
Z203 is a complete single phase network analyzer suited for use with up to 500 VAC voltage range and 5A current. The instrument provides all the following electrical measureable variable: Vrms, Irms, Watt, Var, Frequency, Cosφ. Measurements are availables through
Z203
KATALOĞU İNDİR
Z204 accepts an alternate or direct voltage (up to 1000 VAC/VDC) TRMS and provides and isolated analog output (mA or V). It utilizes dip switches to set the specific range, input, and output. Alternatively to the analog output is an available RS485 Modbus RTU interface.